ACW30D is a one component high quality polyurethane, that cures by reaction with atmospheric moisture to form a durable and weather resistant elastomer.
ACW30D is manufactured in accordance with the ISO/TS16949:2009
Suitable for the installation of automotive windscreens, rearlights and side glass.
Clean and dry all surfaces by removing foreign matter and contaminants such as oil, dust, grease, frost, water, dirt, ice, old sealants and any protective coating.
Minimum application temperature: 5°C. ACW30D should be dispensed from either the cartridge or foil pack by means of a caulking gun. Pierce the membrane at the top of the cartridge and screw on the nozzle. Cut nozzle to give the required angle and bead size. Place the cartridge in an applicator gun and squeeze the trigger. For foil pack, a barrel gun is required. Clip the end of the foil pack and place in the barrel gun. Screw the end cap and nozzle on to barrel gun. Using the trigger to extrude the sealant, to stop, depress using the catch plate. Apply ACW30D in a continuous bead using enough pressure to properly apply the sealant.
Avoid contact with eyes and skin. In case of contact with eyes and skin, wash immediately and thoroughly with soap and water. Seek Medical attention if necessary.
This product is non-toxic after curing completely.